MSTPD15=0, MSTPD27=0, MSTPD25=0, MSTPD22=0, MSTPD26=0, MSTPD20=0, MSTPD24=0, MSTPD16=0, MSTPD6=0, MSTPD2=0, MSTPD28=0, MSTPD3=0, MSTPD14=0, MSTPD23=0, MSTPD5=0
Module Stop Control Register D
| MSTPD2 | AGT1 Module Stop Note: AGT1 is in the module stop state when the count source is either of PCLKB, PCLKB/2 or PCLKB/8. In case the count source is sub-clock or LOCO, this bit should be set to 1 except when accessing the registers of AGT1. 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD3 | AGT0 Module Stop Note: AGT0 is in the module stop state when the count source is either of PCLKB, PCLKB/2 or PCLKB/8. In case the count source is sub-clock or LOCO, this bit should be set to 1 except when accessing the registers of AGT0. 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD5 | General PWM Timer 32EH0 to 32EH3 and 32E4 to 32E7 and PWM Delay Generation Circuit Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD6 | General PWM Timer 32_8 to 32_12 Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD14 | Port Output Enable for GPT Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD15 | 12-Bit A/D Converter 1 Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD16 | 12-Bit A/D Converter 0 Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD20 | 12-Bit D/A Converter Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD22 | Temperature Sensor Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD23 | High-Speed Analog Comparator 5 Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD24 | High-Speed Analog Comparator 4 Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD25 | High-Speed Analog Comparator 3 Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD26 | High-Speed Analog Comparator 2 Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD27 | High-Speed Analog Comparator 1 Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD28 | High-Speed Analog Comparator 0 Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |